Check the locknuts on B and Z‑axes are secure

WHAT YOU NEED 

Tools:Combination Spanner Set

Safety Equipment:Standard Personal Protective Equipment

Other Equipment:Step Ladder

CAUTIONSHARP BLADE: Keep clear of the saw blade while working inside the saw chamber.

  1. Using the Manual Mode window, move the Y-axis to the middle position and press the Z Sol1 and Z Sol2  buttons to move the Z‑axis to the lowest position.
  2. Isolate the saw electrically and pneumatically.
  3. Open up the dome.
  4. Remove the rear frame cover.
  5. Inspect the Z‑axis for any signs of damage.
  6. Inspect all locknuts on the Z‑axis cylinders for any missing or misaligned witness marks.
  7. Tighten and mark locknuts as required.
  8. Refit the rear frame cover.
  9. Close the dome.
  10. Open the saw chamber door.
  11. Inspect the B‑axis for any signs of damage.
  12. Make sure the witness mark on the B‑axis cylinder locknut is present and aligned.
  13. Tighten and mark the locknut if required.
  14. Close the saw chamber door.